Lowenstein Medical elisa 300 Скачать руководство пользователя страница 330

Страница: 330 / 457

A 5 | Ventilation modes and parameters

114

Instructions for Use elisa 300-500 | Supplement A |

SW 2.09.x

| Rev. 11

A 5.5.13

Proportional PSV

Proportional Pressure Support Ventilation

A technological advancement over conventional PSV. In spontaneously breath

ing patients, pressure support is delivered at a level that is proportional to the

degree of compensation required in relation to flow resistance (Flow Support)

and airway resistance (Volume Support). This partially replaces the patient's work

of breathing and allows deeper breaths. The level of pressure support delivered

varies on a breath-by-breath basis and is dependent on flow and inspired volume.

Warning

This ventilation mode relies on a stable respiratory drive.

Warning

Before activating proportional pressure support, bronchopleural

fistulas and endotracheal tubes with a deflated cuff must be ruled

out.

Содержание elisa 300










































































































































































































































































































































































































































































Результаты поиска

Содержание elisa 300

Отзывы:

Lowenstein Medical elisa 300, Инструкция по эксплуатации, Страница: 330 / 457

Результаты поиска

Содержание elisa 300

Отзывы: