Optional Accessories (sold separately):
Lowell Manufacturing offers a full line of 19" equipment cabinets, wall mount shelves, rack mount AC power panels,
AC power strips, and cooling fans that can be used to install the Lowell Amplifier products.
See www.lowellmfg.com for product details.
1
REMOVABLE
PHOENI X
CONNECTOR
Instruction Sheet
IS-MIX2
Issued:4-27-17
Lowell Manufacturing Company
100 Integram Drive
Pacific, Missouri 63069 U.S.A.
Call: 800-325-9660
Fax: 636-257-6606
Click: www.lowellmfg.com
MIX2
INSTALLATION SHEET
AND OPERATORS MANUAL
MIX2 General Description:
The MIX2 is a mixer/preamplifier that includes 6 channels that each include a microphone input at a removable
Phoenix connector and an aux input at an RCA jack. A seventh aux-only channel has a front panel switch to select
one of two rear panel aux input RCA jacks. A mute-select switch allows either for channel 1 (Mic input or Aux input)
to mute all other channels, or for channels 1 through 6 to all mute the channel 7 aux-only input. The post-master-
volume-control outputs include a balanced line level output and a balanced mic level output both on a removable
Phoenix connector, and two parallel unbalanced main output RCA jacks. A pre-master-volume-control tape output
is provided at 2 parallel RCA jacks. A low cut filter switch is included which can reduce the bass response for use in
reverberant spaces (like gymnasiums) and act as a horn protection filter (trumpet protect) when paging horns are
being used.
1
Technical Specifications
Dimensions (inc. rubber feet):
19" wide x 1.80" high x 9.875"deep (483mm wide x 45.7mm high x 250.8mm deep)
Total Harmonic Distortion: < .05%
Weight: 7.0LBS. (3.18KGS) Shipping Weight: 12.35LBS. (5.60KGS) (Weights include rack ears) Color: Black
AC Supply Voltage: 115VAC/230VAC (switch under chassis), 50/60Hz, Power Consumption: 5W
Outputs:
Main Output
– unbalanced parallel RCA jacks 775mV, 280
W,
Line Output - Balanced 775mV, 600
W
and Mic
Output 7mV, 50
W
both on removable Phoenix connector. Tape Output
– unbalanced parallel RCA jacks 75mV, 280
W.
Signal to Noise Ratio:
Mic 60dB, Aux 65dB (from 0dB output level)
Input Channels 1-6: Microphone inputs - balanced Phoenix connectors: 1mV(to reach 0dB 775mV output), 600
W
Aux inputs - unbalanced RCA connectors: 140mV(to reach 0dB 775mV output), 24k
W
Note: Mic and Aux input on same channel are internally mixed. Use one or the other
– not both.
The Mic inputs do not provide phantom power for condenser microphones . External phantom
power supplies (sold by others) may be used to provide phantom power for the MIX2 mic inputs.
Input Channel 7: Aux inputs
– Switchable on front panel - RCA jack “A” or RCA jack “B”.
100mV(to reach 0dB 775mV output), 28k
W
Frequency Response: 20Hz-20kHz +1dB
