Low Cost Mobility 250 GK83, Руководство пользователя

Страница: 10 / 24

10
SCOOTER TILLER CONTROLS
Speed Controls
The speed control allows you to set a speed between 1 (minimum) and 10 (maximum).
Battery Level Indicator
The number of LED bars lit, shows the amount of charge left in your batteries. The amount of charge will
only show at its true level when the scooter is in drive.
Caution – Do not allow the LED bars go out completely as complete discharge of the batteries could
cause irreversible damage.
Lights
A blue colored button at the rear of the tiller operates the lights.
Horn
A yellow button at the rear of the tiller operates the horn.
Thumb/Finger Lever Controls
The left thumb/finger lever controls the reverse and the right thumb/finger lever controls the forward
motion. The amount of pressure applied to each lever will determine the speed the scooter travels at.
Release the lever and the scooter will slowly come to a stop and the electromagnetic brake will be applied.
On/Off Key Switch
Insert the key in the right side of the tiller. Turn the key and the LED bars will light up. There is a delay
before the thumb/finger lever control can be operated, while the controller is checking the circuits.
Figure 12 Figure 13
Battery
Level
Speed
Control
On/Off
Key
Horn
Thumb
Lever
Thumb
Lever
Battery
Level
Indicator
Lights
Key
Switch
Horn
Finger
Lever
Control
Charging
Port
Speed Controls