Lovibond Maxi Direct Скачать руководство пользователя страница 52

Страница: 52 / 268

MaxiDirect_2c 03/2010

1.1 Methods

Chlorine, differentiated determination

with Vario Powder Pack

0.02 – 2 mg/l Cl

1. Fill a clean vial (24 mm Ø) with

10 ml of the water

sample

, close tightly with the cap.

2. Place the vial in the sample chamber making sure that

the marks are aligned.

3. Press

ZERO

key.

4. Remove the vial from the sample chamber.

5. Add the contents of

one VARIO Chlorine FREE-DPD/

F10 Powder Pack

straight from the foil to the water

sample.

6. Close the vial tightly with the cap and swirl several times

to mix the contents (approx. 20 seconds).

7. Place the vial in the sample chamber making sure that

the marks are aligned.

8. Press

TEST

key.

9. Remove the vial from the sample chamber, empty the

vial, rinse vial and cap several times and then fill the vial

with

10 ml of the water sample

10. Add the contents of

one VARIO Chlorine TOTAL-DPD /

F10 Powder Pack

straight from the foil to the water

sample.

11. Close the vial tightly with the cap and swirl several times

to mix the contents (approx. 20 seconds).

prepare Zero
press ZERO

Zero accepted
prepare T1
press TEST

Содержание Maxi Direct













































































































































































































































































Результаты поиска

Содержание Maxi Direct

Отзывы:

Lovibond Maxi Direct, Инструкция по эксплуатации, Страница: 52 / 268

Результаты поиска

Содержание Maxi Direct

Отзывы: