Lovibond Maxi Direct Скачать руководство пользователя страница 230

Страница: 230 / 268

228

MaxiDirect_2c 03/2010

Recall results of a selected time period

Press [MODE], [Shift] + [3][1] keys.

Confirm with [ ] key.

The display shows:

Enter year, month and day for the first day of the required
period, e.g.: 14 May 2009 = [Shift] + [0][9][0][5][1][4]

Confirm with [ ] key.

The display shows:

Enter year, month and day for the last day of the required
period, e.g.: 19 May 2009 = [Shift] +[0][9[0][5][1][9]

Confirm with [ ] key.

The display shows:

• Press

[ ] key and all stored results in the selected date

range are displayed.

• Press [F3] key to print the displayed result.

• Press [F2] key to print all selected results.

• End with [ESC].

Note:

It is possible to cancel the entry by [ESC].
If you want to recall only results of one day enter the same date twice to determine the
time period.

<Storage>
sorted: date
from yy-mm-dd
__-__-__

to yy-mm-dd
__-__-__

from 2009-05-14
to 2009-05-19
Start:

cancel: ESC

print: F3
print all: F2

Mode

Содержание Maxi Direct













































































































































































































































































Результаты поиска

Содержание Maxi Direct

Отзывы:

Lovibond Maxi Direct, Инструкция по эксплуатации, Страница: 230 / 268

Результаты поиска

Содержание Maxi Direct

Отзывы: