Lovibond Maxi Direct Скачать руководство пользователя страница 229

Страница: 229 / 268

227

MaxiDirect_2c 03/2010

Press arrow key [ ] or [ ] to select the required baud rate.
(1200, 2400, 4800, 9600, 14400, 19200)

Confirm with [ ] key.

End with [ESC] key.

Back to Mode Menu with [ESC] key.

Back to method selection with [ESC] key.

2.4.4 Recall / delete stored results

Recall all stored results

Press [MODE], [Shift] + [3][0] keys.

Confirm with [ ] key.

The display shows:

The stored data sets are displayed in chronological order,
starting with the latest stored test result. Press

[ ]

key and

all stored results are displayed.

• Press [F3] key to print the displayed result.

• Press [F2] key to print all results.

• End with [ESC].

• Press arrow key [

] to display the following test result.

• Press arrow key [

] to display the previous test result.

If there are no test results in memory the display shows:

no data

<Storage>
display all data
Start:

cancel: ESC

print:

print all: F2

Mode

Esc

Содержание Maxi Direct













































































































































































































































































Результаты поиска

Содержание Maxi Direct

Отзывы:

Lovibond Maxi Direct, Инструкция по эксплуатации, Страница: 229 / 268

Результаты поиска

Содержание Maxi Direct

Отзывы: