POECCTVSystemQuickSetupGuide
1
2
3
4
6
7
5
POE Camera Panel
IR LEDs
Lens
Microphone
Power Port
POE Port
Network port
VGA output
Mouse
USB Backup
HDMI output
Power Supply
POE Cameras
Please follow the steps to install the HDD into the recorder
①
Remove the 2 screws on the sides of the recorder and the 2 screws on the back of the
recorder. Slowly and gently remove the cover by sliding it towards the back of the recorder
②
Insert the 2 SATA cables and push the HDD into the recorder chassis and through the 4
holes on the bottom of the chassis.
③
The 4 holes will house the screws to mount the HDD. Install the attached 4 screws to hold
the HDD.
HDD Installation
48V Recorder Panel
Please follow the steps to figure out the connection between Camera and Recorder. If you are
not able to view the live videos from the cameras after system installation, please check if all
the devices are connected with each other properly.
①
Connect the recorder to your router with an Ethernet cable
②
Connect the mouse to the recorder
③
Connect a monitor (not included) to the recorder with a VGA/HDMI cable, plug the monitor in power
④
Connect the POE cameras to the recorder with an Ethernet cable. (You can also plug the cameras
in power using a DC12V1A power adapter (not included) and then connect the cameras to the router
via network cables. )
⑤
Plug the recorder in power using the power adapter. After the recorder has been powered, please
check if all the status LEDs on the back and front of the recorder turn on.
System Installation
Intial Set-up
After system installation, the recorder will start. Then enter the system and follow the wizard
to set intial settings.
①
The default password is blank, click 'Ok' to enter the system. We strongly suggest you set
up a complicated password (11 characters) for admin user to avoid hacker attacking your
system. To create a new password, please refer to the file on this
page:
www.luowice.com/en/P9
②
Click 'Next'. Note: if you need to use a phone app to access the CCTV system remotely, you
can search and download the EseeCloud/EseeCloud3 App from Google Play Store or Apple
Store and install it on your mobile phone. And you can scan the 3rd QR code to add the CCTV
system to the downloaded app.
③
Set the system to your local time zone and enable 'Sync Time' then click 'Next'.
④
After network connection test, the network status will show 'Healthy Network'. Then click
'Next'.
⑤
First time to use the HDD, please format it once.
⑥
After 'Format Succeed' appears, click 'OK'> 'Done'.
⑦
Then the home page will appear. After about 1 minutes, you can watch the live videos from
the cameras.
https://youtu.be/5AVPQDr4TLk
POE CCTV System Installation Guide
For detailed steps, please watch the video
:
https://youtu.be/7BsMgquwgxI
SystemInitialSetupGuide
https://youtu.be/_Ld5vFm8tmE
Email Support :
Support Time:
Monday - Friday
Website
:
www.luowice.com/en
Manufacturer:
Guangzhou Lieju Electronic Technology Co.,Ltd.
Address:
Dongfeng Industry Park ,Lingshan East
Road,No.15, Zhucun,Tianhe District,
Guangzhou,China,510665
[
Manufacturer
]
①
②
