Louvolite Roller System 32, Руководство по эксплуатации

Страница: 3 / 12

Mark the hole positions before drilling and plugging if necessary. Use two screws
in each bracket ensuring that the brackets are level. Remember to allow room for
the blind to clear any obstacles when deployed, e.g. door or window handles.
Use this figure to position the outside of your brackets accordingly whether
inside of the recess or outside of the recess
Inside the recess Outside the recess
1535mm 1535mm
Fitting the blind.
Once the brackets have been fitted the blind can be inserted into the brackets.
Note – For conventional roller blinds the fabric comes down from the back of the
blind and for reverse roll blinds the fabric hangs from the front of the blind.
With the fabric rolled around the tube, offer the idle end (the end with the pin to
the idle end bracket.
With the idle end in place offer the control end to the opposite bracket and
secure the blind in place ensuring that the centre lug has dropped into the slot
on the bracket.
Control end bracket
Slot location
Idle end bracket