STEP 3
Part Number: 50125
Digital Control Center
“
How To Confirm Program
”
DATE ISSUED:
December 2014
MODELS EFFECTED:
CS and LG Series
Press and hold the "Prime" and "Temp" buttons together, count to
6 or wait until the display reads 0 on the left (this is variable "0").
The "0" will be flashing. The number on the right will either be
25 or 30
Press "power" button to activate the control. The
setpoint temp will show up and will either be 450, 350
or 375. This determines which program column
numbers to use.
STEP 1
STEP 2
Use the "up arrow" to change the flashing number on
the left to the number or letter needing to be changed.
(variables are numbers 0
-
9 and then letters A
-
S)
NOTE:
ignore the changing numbers on the right.
STEP 4
When you reach the number/ letter to be changed, press and
release quickly, the "Prime" button once. The number/letter on the
left and the 4 blue dots will be flashing. While the 4 blue dots are
flashing, the number on the right can be changed using the temp
arrows.
STEP 5
Use the up or down temp arrows to change the number
on the right to the desired number.
STEP 6
Press the "Prime" button once, quickly, the number/letter on the
left will stay flashing, and the four blue lights will go off.
*
If necessary, cycle to the number/letter on the left to the next
variable needing to be changed, and repeat steps 3 thru 6.
* If no other variables need to be changed move to step 7