www.lorexbaby.com
LB2251AC1_Quick Start Guide_R1
Page 1
1-20022013
DC 6V
ADD-ON CAMERA
LB2251AC1
QUICK START GUIDE
x1
x2
x1
What’s Included
Getting Started
1
2
1
2
Make sure all power cables are at least 3ft / 1m
away from the crib and out of reach of your child.
Place the camera and monitor next to each other. Make sure the
camera and monitor are turned on.
Pairing the Camera with Your Monitor
Press and hold
until
is shown on
the monitor.
NOTE:
If a camera is already connected to this channel, the new
camera will replace the existing camera.
3
Connect the power adapter to the camera and
then to a power outlet.
Slide the power switch
to ON.
4
5
Use the included cable clips to help keep
power cords away from your child.
Cable clips
NOTE:
Immediately move the camera away from the
monitor to avoid speaker feedback.
TIP
NOTE:
If pairing was unsuccessful, repeat steps 2 to 5
of the pairing process.
DC 6V
DC 6V
LINK
C1
LINK
Press to to select the
channel you would like to
pair the camera to.
C2
Press to confirm
the pairing channel.
The Link LED will
begin flashing.
LINK
Press the PAIR button on the
back of the camera.
PAIR
NOTE:
This camera is wall mountable
and can be powered by batteries (4x
AAA -- not included) see the User’s Guide
provided with LB2251 for details.
x2
x2
