Installing the Camera
1
www.lorextechnology.com
SG650
QSG_R1 Page 1
Contents
1 x Indoor/Outdoor
Dummy Camera*
THIS IS NOT A REAL CAMERA.
It is only meant for theft deterrence.
* Lorex Technology Inc.
assumes no liability
with the use of imitation
security products.
3 x Mounting Screws
3 x Drywall Plugs
Mount the camera to the wall or ceiling using
the included mounting screws.
NOTE:
Use drywall plugs (included) if
installing in drywall.
2
Camera Base
If you want to adjust the vertical angle of the
camera, loosen the screw on the camera stand and
tilt the camera. Tighten the screw when finished.
3
If you want to rotate the camera, pull the
camera out from the stand and twist.
Loosen
Tilt
Pull and twist
SG650 - DUMMY BULLET CAMERA
CAMÉRA FACTICE DE TYPE PROJECTILE / CÁMARA FALSA DE BALA
QUICK START GUIDE / GUIDE DE DÉPART RAPIDE / GUÍA DE INSTALACIÓN RÁPIDA
