Lorex N881 Series, Руководство пользователя, Страница: 90 / 136

Using the Main Menu 16
16.4.7 P2P Setting
The P2P Setting menu is used only to enable / disable remote access to the system using a P2P
connection.
CAUTION
P2P connection is the primary method used for remote access to your security system using the Lorex Home app.
If you disable P2P connectivity, you will only be able to access your system over the Internet using DDNS. See 20
DDNS Setup (Advanced) , page 118 for details.
To change P2P setting:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu .
2. Click , then click
NETWORK
. Click the
P2P
tab on the side panel.
3. Check Enable to use P2P, or uncheck to disable.
4. Click Apply .
16.4.8 Configuring Video Loss Settings
Configure video loss settings and how the system reacts to a video loss event.
Video loss
means
that video from one or more cameras was interrupted or disabled. It could be caused by a number
of factors, such as a loose or damaged connection, loss of power to a camera, or a blocked camera
lens.
To configure video loss settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu .
#LX400113; r. 3.0/56326/56332; en-US 82