Lorex N881 Series Скачать руководство пользователя страница 78

Страница: 78 / 136

Using the Main Menu

The following alarms are shown in the Alarm Status menu:

•

No HDD:

No hard drive is detected.

•

HDD Error:

Hard drive error detected.

•

Disk Full:

Hard drive is full.

•

IP Conflict:

More than one device on the network is using the same IP address.

•

Net Disconnect:

System is not connected to the network.

•

MAC Conflict:

More than one device on the network is using the same MAC address.

•

Video Loss:

Shows disconnected channels.

•

Motion Detect:

Shows channels with active motion alarms.

To access the event information menu:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

, then click

EVENT

16.3.6

Online Users

View all users connected to the system using computers or mobile devices.

#LX400113; r. 3.0/56326/56332; en-US

Содержание N881 Series









































































































































Результаты поиска

Содержание N881 Series

Отзывы:

Lorex N881 Series, Руководство пользователя, Страница: 78 / 136

Результаты поиска

Содержание N881 Series

Отзывы: