Lorex N881 Series, Руководство пользователя, Страница: 33 / 136

Recording 9
2. Click , then click STORAGE . Click the SCHEDULE tab on the side panel.
3. Under
Channel
, select the channel you would like to configure or select
All
.
4. Configure the schedule as needed:
• Check Continuous , Motion , Alarm , MD&Alarm , or Smart Motion to select the record-
ing type you would like to configure.
• Click-and-drag on each day to customize the recording schedule. The schedule is set up as
a grid, which each block representing one hour.
• Click beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click . This will allow you to set exact start
and end times for a schedule.
• To disable all recording of the selected type on the selected day, click .
5. Click Apply .
9.4 Setting up Scheduled or Manual Recording
You can set the system to record based on a schedule or you can manually turn recording on and
off. By default, the system is set to always record on a schedule.
To configure the recording schedule, see 9.3 Setting the Recording Schedule , page 24.
#LX400113; r. 3.0/56326/56332; en-US 25