HD Wire-Free Security System
Quick Connection Guide
www.lorextechnology.com
STEP 1:
Initial Setup
* Per camera in multi-camera packs
Package Contents
LHB800_QCG_EN_R3
To prepare the cameras and receiver:
Before you begin, you will need to prepare the wire-free cameras and power packs.
HD Wire-Free Security Cameras
(Model Number:
LWB3800
/
LWB3900 Series
)
Rechargeable
Power Pack*
Mounting Kit*
Power Pack
Adapter
USB Mouse
Ethernet Cable
DVR Power
Adapter
HDMI Cable
HD DVR
(Model Number:
LHB800 Series
)
Camera Antenna*
STEP 3:
Connecting with Lorex Cirrus
Need Help?
Visit us online for up-to-date software and complete instruction manuals.
Click on the
Downloads
tab
4
Visit
lorextechnology.com
Search for the model number
of your product
Click on your product in the
search results
3
2
1
1. Remove the power pack from each camera by pushing
both release buttons*, then pulling down on the power
pack. Place your hand underneath the power pack
when removing to prevent it from falling.
2. Peel off the
PLEASE REMOVE
label covering the
contacts on each power pack.
3. Insert the charged power packs into each camera
base. Push up until the power pack
‘clicks’
firmly into
place.
4. Twist the adjustment ring near the camera base
counterclockwise to loosen and reposition each
camera as shown to the right. Connect one of the white
antennas to each camera.
STEP 2:
Setting Up the DVR
1. Connect the DVR to your router
using the included Ethernet cable.
2. Connect the included power adapter
to the DVR. Wait a few minutes for
the system to start up.
To set up the DVR:
Next, you must set up the DVR and connect it to your network.
OPTIONAL:
Full DVR Setup
• This guide describes basic setup of the DVR only. This
installation is intended for users who wish to monitor their
system using the free Lorex Cirrus app on their smartphone
or tablet.
• You may choose to use the DVR interface to control your
wire-free security system. Connect the included USB mouse
to one of the USB ports labelled
Mouse / Backup
, and
connect a monitor using the included HDMI cable. See the
included
Quick Reference Guide
for details.
Copyright © 2020 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
ATTENTION:
Fully charge the power pack before use.
*
*
English Version 3.0
GUIDE
1
/
2
Adjustment ring
* Top view
*
NOTE:
If you do not see video from one or more cameras,
ensure you have removed the
PLEASE REMOVE
label
from the power pack. If the issue persists, see the
“Troubleshooting” section on the back of this document.
NOTE:
If you have manually set your DVR, use the same password created during
that setup. The default password will not work.
DEVICE ID: xxxxxxxxxxxxx
DEVICE ID: xxxxxxxxxxxxx
DEVICE ID: xxxxxxxxxxxxx
To connect with Lorex Cirrus:
1. Download and install the free
Lorex Cirrus
app from the App Store
or Google Play Store.
2. Tap the Lorex Cirrus icon to launch the app.
Connect to your system using the free Lorex Cirrus app for smartphones and
tablets (iOS and Android).
3. Tap
to open the menu. Tap
Devices
, then tap
Add
.
5. Enter a
new, secure 8-15 character password
. This password will be used to
connect to your system from now on.
Record your password below and store in a secure place:
4. Enter the following:
A
B
C
D
E
F
A
B
C
D
E
F
Ensure
Device ID
is selected.
Tap to scan the QR code on the back
of your recorder using the camera on
your mobile device.
Ensure the
Client Port
reads
35000
.
Enter the username (default:
admin
).
Enter the password (default:
00000000
).
Tap
Save
.
STEP 4:
Pairing the Cameras
Next, you must pair each camera to your recorder. You can pair cameras using the
Lorex Cirrus app, or with the recorder.
To pair cameras using the Lorex Cirrus app:
1. From Live view, tap any free
channel you would like to
pair a camera to (marked
with a
icon).
2. Tap
PAIR
. A timer
for 30 seconds
appears.
3. Press and hold the pair button on the
back of the camera for 3 seconds.
NOTE:
A “pairing successful” message should appear on screen. If you do not see this message,
repeat the steps above.
LWB3800 / LWB3900 Series
To pair cameras using the recorder:
Hover the mouse pointer near the top of an empty channel
and click
.
You will then have 30 seconds to press and hold the pair
button on the back of your camera (shown above).
