HD Wire-Free Security System
English Version 1.0
Quick Reference Guide
www.lorex.com
Before You Start
L222A8_QRG_EN_R1
2 / 2
•
Upgrade your recorder firmware and mobile app to the latest versions.
•
Please note that an upload speed of 3.5Mbps is required for remote
video streaming. Up to 3 devices may connect to the system at the same
time.
•
Ensure you have completed initial setup of the Lorex Cirrus app and the
recorder as detailed in the
Quick Connection Guide
.
Lorex Cirrus:
App Overview
Main menu
Select channels for
live viewing from all
connected devices
Configure settings for
selected channels
Cast to your
monitor
AirPlay
to your
monitor
Date and time
stamp
Battery strength
indicator
Wireless signal
strength indicator
Device - Channel name
Tap to activate siren
Tap to activate
white light
Split-screen options
Save a snapshot
of the current live
view
Tap to enable the
camera’s intercom; tap
again to stop
Tap to start manual
recording; tap again
to stop
Set to full
HD video quality
Tap to switch between
muted and unmuted
Lorex Cirrus:
Playback
Play back recorded video using the Lorex Cirrus app.
To play back recorded video:
1. Launch the
Lorex Cirrus
app.
Playback Controls:
2.
Tap
, then tap
Playback
.
3. Set search options for playback:
Video timeline:
Tap to start
playback from
the selected
time. Pinch or
spread fingers
to change the
time period.
Playback
date
Lorex Cirrus:
Device Settings
Change recorder name and format storage using the Lorex Cirrus app.
To change device settings:
1. Launch the
Lorex Cirrus
app.
2. Tap a channel on the device you want to
edit from Live View.
3.
Tap
, then tap
Settings
.
4. Configure the following as needed:
a.
Device Name:
Enter a name of your choice
for the recorder (e.g.,
Wire-Free System
).
b.
Format:
Tap to select a storage device
(hard drive or microSD card) to format. Tap
Format
to confirm the selected device and
begin formatting.
IMPORTANT:
Formatting a storage device
will erase all recordings and snapshots.
This step cannot be undone.
NOTE:
Only the admin user can format
memory.
5.
Tap
Save
to save settings.
4.
Tap
Play
to begin playback.
a. Tap a recorder to reveal available
channels.
b. Tap channels to include in search.
c. Tap a date from the calendar to seach for
recordings from. Dates with recordings
available are marked with a red dot.
NOTE:
Tap
to filter recordings by type
and resolution.
Playback time
Video
playback
Slower
Play / Pause
Faster
Next Frame
Stop
Snapshot
Manual
Recording
Mute / Unmute
You can use playback mode in portrait or landscape mode. Landscape mode is
shown below:
a
b
c
a
b
03/11/2020
Lorex Cirrus:
Camera Settings
Change camera settings using the Lorex Cirrus app.
To change camera settings:
1. Launch the
Lorex Cirrus
app.
2. Tap a channel in Live View to select it.
3.
Tap
to open settings for the selected channel.
4. Configure the following as needed:
a.
Channel Name:
Enter a name of your choice
for the channel (e.g.,
Porch Camera
).
b.
Record Length:
Set the recording length
when motion is detected.
c.
Video Resolution:
Set
720p
or
1080p
recording.
d. Motion Settings:
Configure the motion
detection settings per channel.
e. Recording Schedule:
Set a schedule for
video recording at certain times throughout
the week.
f. Audio:
Tap to mute / unmute.
5.
Tap
SAVE
to save settings.
a
b
c
d
e
f
L222A8D Series
