Lorex D861 Series, Руководство пользователя

Страница: 80 / 122

Using the Main Menu 15
2. Click
SYSTEM
, click the
General
tab, then
General
on the top panel.
3. Configure the following:
• Device Model: Shows the model number of your system.
• Device No.: Select the remote control address of the system.
• Language: Set the system languages. Available options are English, French, and Spanish.
• Video Standard: Select NTSC (North America) or PAL (Europe).
•
Instant Playback:
Select the amount of time (in minutes) the system will go back when in-
stant playback is activated in live view.
•
Logout Time:
Select the idle time (in minutes) before the system will logout the current
user.
• Navigation Bar: Check to enable the Navigation Bar that comes up when you left click in
live view.
• Mouse Pointer Speed: Use the slider to adjust the mouse speed.
4. Click Apply .
15.8.2 Setting Date & Time
As part of the initial setup, you will set the system date & time. This menu allows you to adjust
the date & time, and configure settings for Daylight Savings Time (DST) and Network Protocol
Time (NTP).
CAUTION
It is important to always ensure your system date and time are accurate.
Inaccurate time stamps may render
your footage unusable for court evidence.
To set system date and time:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
#LX400111; r. 5.0/56647/56647; en-US 72