Copyright © 2009 Lorex Technology Inc.
Figure 1.0 Attach the PATA-to-SATA
converter to the new SATA HDD
Use the PATA-to-SATA converter to convert your existing PATA DVR to a SATA interface.
Use the PATA-to-SATA Converter is compatible with the following systems:
DVR:
LCD DVR:
ACCP2SATA
ACCP2SATA-SG19
DHU500R Series
D17800 Series
L500 Series
SG17LD800 Series
SG19LD800
Series
Using the PATA to SATA Converter
ACCP2SATA
NOTE
: If your system uses two hard drives, you will need an additional PATA-to-SATA Converter.
1.
Power off your DVR system.
2.
Carefully remove the SATA hard drive and mounting bracket
according the steps outlined in your system’s instruction
manual.
3.
Attach the PATA to SATA Converter to the new SATA hard drive
(not included) (see figure 1.0).
NOTE
: The PATA to SATA Converter can only connect one way.
Make sure the converter is firmly connected to the SATA hard
drive.
4.
Insert the SATA HDD with converter into the mounting bracket.
PATA-TO-SATA
CONVERTER
Instruction Manual
English Version 1.0
CONTENTS
1.
PATA-to-SATA Converter (x1)
2.
Fastening Screws (x 2)
PATA-TO-SATA CONVERTER
FASTENING
SCREWS
MOUNTING PLATE FOR LCD DVR
(Included with ACCP2SATA-SG19 only)
