www.lorexbaby.com
BB2241AC1_Quick Start Guide_R1
Page 1
1-20022013
ADD-ON CAMERA
BB2411AC1
QUICK START GUIDE
x1
x2
x1
x2
x2
What’s Included
Getting Started
1
2
1
2
Make sure all power cables are
at least 3ft / 1m away from the
crib and out of reach of your child.
Place the camera and monitor next to each other. Make sure the
camera and monitor are turned on.
Pairing the Camera with Your Monitor
Press and hold on your monitor until the screen looks like the
figure below.
Press to select the channel you would like to pair the camera to.
NOTE:
If a camera is already connected to this channel, the new
camera will replace the existing camera.
3
Connect the power adapter to the camera and
then to a power outlet.
Slide the power switch
to ON.
Press on your monitor to begin pairing. The LINK LED
flashes to show that pairing mode is on.
4
5
Press the
PAIR
button on the back of the camera. Video
from the camera is immediately shown on the monitor
once the camera has been successfully paired.
PAIR
Use the included cable clips to help keep
power cords away from your child.
Cable clips
NOTE:
This camera is wall mountable
and can be powered by batteries
(4x AAA - not included). Please see the
User’s Guide provided with BB2411 for
details.
NOTE:
Immediately move the camera away from the monitor
to avoid speaker feedback.
TIP
C1
All manuals and user guides at all-guides.com
all-guides.com
