manualshive.com logo in svg

Looperlative LP1 Gen B, Руководство пользователя, Страница: 6 / 29

Поделиться
Скачать
Looperlative LP1 Gen B Скачать руководство пользователя страница 6

⚫

 

Turn on the power to your LP1. 

⚫

 

Your LP1 will display “LP1 booting ...” 

⚫

 

After about 8 seconds, the LP1 will display “Looperlative LP1” on the top line and the software 
version on the bottom line. 

 

Setting Audio Levels 

 
To get the best possible audio from your sound system.  It is important to correctly set audio levels.  
When the display is left at the top menu where the software version is displayed for 10 seconds, then 
the display will show input level on the top line and output level on the bottom line.  These are the 
levels of the digital audio within the unit.  If possible, adjust signal levels with other equipment.  If this 
is impossible, then it is possible to adjust the trimmer pots within the LP1 GenB.  There are 6 trimmers: 
right and left input, right and left output, and right and left aux out.  These trimmers require a small 
screw driver to adjust the gain.  You should always unplug the LP1 before removing the lid. 
 
If the input audio level is too low or too high, adjust the volume on your audio source.  Audio levels 
should be set as high as possible without distortion. 
 
When using multiple tracks or overdubbing it is possible to overdrive the output of the LP1 and cause 
distortion.  If this occurs, adjust the “All Main Level” from the “All Tracks” menu.  A setting of -1 or -
2 is often enough. 
 

Recording your first loop 

 

⚫

 

Press “REC/DUB” to begin recording. 

⚫

 

Play your musical phrase that you want looped. 

⚫

 

Press “REC/DUB” to end the loop and enter overdub mode. 

⚫

 

When you have completed overdubbing to the track, press “REC/DUB” one more time to change 
from overdub mode to play mode. 

⚫

 

Press “PLAY/STOP” to stop playback of the loop. 

Menu Operation 

 
The selector knob allows you to scroll through menu items and to change the value of a menu item.  
Menu items are displayed on the second line of the panel.  To select a menu item: 
 

⚫

 

Turn the knob until the menu item is displayed. 

⚫

 

Press ENTER.   

 
To change the value of a menu item: 
 

⚫

 

Select the menu item. 

⚫

 

Turn the knob until the value you want to select is displayed. 

⚫

 

Press ENTER  

 
The MENU button returns the display to the previous menu. 
 

Содержание LP1 Gen B






























Отзывы:

Нет отзывов