Longshine POS GT-150 Series, Руководство пользователя

Страница: 31 / 40

Hardware Setup
25
2.2g RFID Installation……
An optional RFID Card can be installed on the GT-150 Terminal.
Package Content
y
A RFID card
y
A RFID cable
y
Screw x 2
Installing RFID
1. Turn off the system power.
2. Loosen the two screws on both sides as the picture shown below.
3. Slide out the rear plate (A) and take off the back plate (B). Loosen the screw (C) and slide the
unit outwards to reach the main board.
A
C
Loosen this
screw!
B