Introduction
11
2011/01/07
Version:
2.2
2. Hardware Setup
Getting Started
This section describes how to install the optional accessories on your POS GFT-150
Touch
Terminal for optimal serviceability.
2.1 Pre-installation Notice
Before you start installing POS GFT-150 terminal, please read the following notices carefully.
1.
The POS GFT-150 terminal does not support PCI slot.
2.
Do not plug in or unplug any interior devices, such as memory module or any function card,
when the ATX PSU is powered on.
3.
For installation and compatibility, using the DDR2 RAM Module from the original
manufacturer is recommended.
4.
The USB device connector is Hot Swap. Do not plug in or unplug any connectors other than
USB devices when the power is on.
5.
The spill proof design of POS GFT-150 conforms to IP-65 standard from front bezel.
6.
Do not insert or remove any devices or components from the POS GFT-150 terminal while the
power is on.
