LONGER LK4, Инструкция по эксплуатации

Страница: 20 / 27

www.longer3d.com info@longer3d.com
18
(3) Online printing
Open the Changlang 3D slicing software. The first step is to turn on the model. The second
step is to open the model settings. The third step is to select the serial port number displayed by
each computer. Generally, the larger serial port is selected. Normally select "AUTO" for the
special rate. If you still cannot connect normally, select 115200. After the port is selected
correctly in step 5, the original U disk icon will change to a printer icon. At this time, the printer is
connected
。
After slicing the model to be printed, open the file in the first step and directly select the
print in the second step. If the printer is connected at this time, the print status bar will pop up.
If there is no connection, the save gcode code will pop up. In the third step, click print. At that
time, the temperature of the hot bed and the temperature of the print head will rise to the set
temperature, and then printing will start
。