Operation and Maintenance Instruction LNK-OM-LR-03A/V3.2
5
3.2.2 Unscrew the Fixing-ring from the external light, Make it go through the fabric on the apex
of the liferaft canopy(designated place for external light). And screw the fixing-ring tight
and firmly to fix the external light as below Figure3-2;
Figure3-2
Remark: There is a rubber sealing ring at inner circle of fixing-ring (in Figure3-2) for
external light. Its function is to ensure the external light waterproofed. Users should make
sure it was not missing and been placed well during the installation.
3.2.3 After external light well fixed, to ensure the liferaft have reliable waterproof performance,
a waterproof measure should be make on the external light mounting spot. Get one round
shape rubber cloth with Diameter
≥
105mm
，
coating glue on the whole polish side of rubber
cloth, then glue it at inside of the liferaft canopy. Cover whole external light bottom up as Figure
3-2-1 shows
：
Figure3-2-1
3.2.4 The main light body with internal light should be installed by buckle on the proper position
inside liferaft. So the internal light can provide illuminating for the survivors to read the
instructions. And it should be easily to be reached so the survivors can operate the
manual switches on the main light body if needed. The installation steps will show as
below Figure3-3.
Fixing-ring of lights
Liferaft canopy fabric
Proper belt inside of
liferaft
Installation buckle
Liferaft canopy fabric
Round Rubber cloth
φ≥
105mm
