Maintenance
Module 8023
6-2
CAUTIONARY & GENERAL ADVICE
WARNING
The control box electronics use devices that are sensitive to static
discharge. Incorrect handling of any of the boards or individual
components could cause permanent damage.
General Advice
Following are a few simple precautions and general information items that
should be read prior to performing any maintenance functions.
1.
Always ensure the unit is disconnected from the mains power source before
commencing.
2.
Always ensure the unit is disconnected from any air supplies before
commencing.
3.
The use of a proprietary wrist-grounding strap is recommended.
4.
Retain any anti-static packaging to enable safe storage of removed boards or
components.
5.
The use of a container in which to place individual items such as screws,
washers, nuts that are removed during any of the operations is recommended.
This will help prevent loss and reduce the risk of metal contamination of any
product.
6.
Metric threads are used throughout the detector.
7.
Clear Silicon rubber will be required if a keyboard overlay is to be replaced.
8.
The following simple tooling should enable most maintenance to be
successfully carried out.
-
Terminal flat bladed screwdriver.
-
Medium sized flat bladed screwdriver.
-
Set of flat/ring spanner/wrench set 3mm to 10mm.
-
Flexible thin bladed straight edged palette knife.
-
Set of 3mm to 10mm nut spinners/nut drivers.
-
Small and large pliers.
-
Small torch/flashlight.
-
25W soldering iron.
-
22 SWG solder.
Содержание IQ2
Страница 92: ...Maintenance Module 8023 6 1 Frequency links Tx Inductors Balance inductors ...
Страница 101: ...Wiring Diagrams Module 10088 8 2 Figure 1 Optional External Sensor Connection Ladder Diagram ...
Страница 102: ...Spare Parts Module 11050 9 1 SPARE PARTS CONTENTS Spare Parts Lists 2 ...
Страница 104: ...Service Return Module 12005 8 1 SERVICE RETURNS FORMS CONTENTS Instructions 2 Form 3 ...
