Operating instructions
ScanAfia X TK, S, ICU Version 1.5
Copyright © Lojer Oy, 2015
1
1
ScanAfia X hospital bed
This document gives operating instruction for the use of the following hospital
beds: Lojer ScanAfia X TK-280 / 290, TK-480 / 490, S-280 / 290, S-480 / 490,
ICU E- and ICU 480 / 490.
The ScanAfia X series hospital beds are designed to be used by healthcare
professionals with patients over the age of 12 and a minimum height of 146cm
(categories 1, 2 and 3 of standard EN 60601-2-52: 2010). Models S, ICU E and
ICU categories 1, 2 and 3. TK models category 3.
Appropriate environments are:
•
intensive care in a hospital
•
acute care ward in a hospital, health center or equivalent institution
•
wards in hospitals or other equivalent institution offering long-term care.
ScanAfia X TK-, S-, ICU E and ICU hospital beds are available in widths of
80cm or 90cm. The ScanAfia X TK and S models are 2 or 4 function beds and
models ScanAfia X ICU E and ICU are 4 function beds. In 2 function beds (TK-
and S- 280 / 290), the height of the bed surface and the backrest are adjustable.
In 4 function beds (TK-, S-, ICU E and ICU- 480 / 490), in addition, the knee
and leg section height and inclination are adjustable.
The models ScanAfia X S, ICU E and ICU also have the Trendelenburg /
reverse Trendelenburg functions. Models ICU E and ICU have electrically
adjusted Trendelenburg / reverse Trendelenburg functions and the S models
are adjusted with a gas spring.
IMPORTANT!
Read these instructions carefully before operating the hospital
bed.
IMPORTANT!
Following these instructions ensures that the hospital bed is
used safely and that the conditions of the warranty are met.
