Operating instructions
ScanAfia X TK, S, ICU Version 1.5
Copyright © Lojer Oy, 2015
33
IMPORTANT!
Danger of crushing fingers between the lift support and the
end of the bed. Exercise caution when installing a lift support
in the bed.
IMPORTANT!
Before using the lift support make sure that it is above the bed
surface and locked to prevent sideways movement.
IMPORTANT!
Check that there is room above the bed. When you raise the
bed, the lift support raises with it.
7.4 Operating the dining tray (70253KP, 70257KP)
The dining tray is used as an auxiliary surface when the patient dines in bed.
The dining tray is installed between the raised side rails, nearly in the middle of
the rails so that the legs of the tray are on top of the middle rung of the rails and
prevented from sideways movement by the rails (Figure 71). The dining tray is
available for ScanAfia X beds of widths 80cm and 90cm. The SWL of the dining
tray is 5kg.
IMPORTANT!
Exercise caution when placing the dining tray on the bed to
avoid getting hands or fingers between the dining tray and the
rails (danger of crushing).
Figure 71.
Dining tray placed on the rails
Figure 72.
Warning labels for dining trays of beds of widths 80cm and 90cm
IMPORTANT!
Before using a dining tray, make sure that the tray is placed
firmly between the rails and cannot move sideways (danger of
burns).
IMPORTANT!
The dining tray can only be used when the rails are in the
upper position.
