logitrans SELFMDT Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 36

logitrans SELFMDT Скачать руководство пользователя страница 32

32

Never use sharp objects or solvent

cleaners when cleaning.

The machine may only be used and maintained by persons who are familiar

with the machine and are instructed in the possible hazards. Responsibilities,

competence and staff monitoring must be regulated precisely by the responsible

operator. The responsible operator must ensure that the contents of the instruction

manual are understood.

Repair, which is not described in the instruction manual, may only be carried

through by authorised persons.

Failure to observe the instructions may result in danger to persons, environment

and the machine.

Work must only be carried through, when the machine is switched off.

When carrying through maintenance on the lifted gripping arms, secure with

suitable support elements.

Immediately after completed work, all safety and protective devices must be fitted

and reactivated.

6.1 Cleaning

Avoid spraying water on bearings, sealings and electrical components,

when cleaning the Multi drum turner.

6.0 Maintenance

«
...
30
31
32
33
34
...
»

Содержание SELFMDT





































Отзывы:

Нет отзывов