logitrans SELFMDT Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 36

logitrans SELFMDT Скачать руководство пользователя страница 26

26

ATTENTION
Moving parts

4.1 Safety regulations

•  Never walk under a raised load!
•  Never stand between the gripping arms!
•  Before lowering the carriage, make certain that no foreign

elements can hinder the free lowering of the carriage.

• The Multi drum turner is designed for use on an even and

level floor.

• During transport the carriage shall be raised as little as

possible.

• Transport with raised carriage should be made over the

shortest possible distances and at low speed.

• Check that the chains lift equally. They shall be equally tight

when the carriage is loaded.

• Chains and chain bolts must not be damaged. Chains that have become

permanently stretched (max. 2 % of original length) must be scrapped.

The safety instructions in the instruction manual, the applicable national accident

prevention regulations and internal working, operating and safety regulations, if any,

must be observed.

4.0 Optimum safety

«
...
24
25
26
27
28
...
»

Содержание SELFMDT





































Отзывы:

Нет отзывов