logitrans SELFMDT, Руководство пользователя, Страница: 21 / 36

21
3.0 How to operate the Multi drum turner
At the Stops display, press on the first stop in the requested direction, and the
following is shown.
1. Use
➕
/
➖
to choose the size of
the angle or use TEACH to choose
actual position.
2. Use
✔
/
✖
to accept/cancel choice
and return to Stops display.
3. At the Stops display, choose the
next stop position/angle and repeat
the procedure.
3.10.5 Deleting stop positions
At the Stops display, press “CLEAR ALL” to delete all set stop positions/angles.
3.10.6 Setting the end stop limit for gripping arms (inner/outer)
If a limitation of the range of movement of the gripping arms is needed, a maximum
and/or a minimum gripping distance can be set.
E.g. The minimum gripping distance or “Inside End Stop Limit” may be useful when
handling plastic barrels/drums to prevent unnecessary deformation of the barrels/
drums and/or to ensure accurate repeatability, when gripping the same type of
barrels/drums.
The value for the end stop limit is the
distance between the gripping arms,
measured in mm.