Logitek mixIT Audio Console System/JET67 Manual
40
The Cue Bus
To audition a source before putting it on the air, tap the “Cue” button. This will send
the source’s pre-fader audio to the cue speaker built into the console. Tap the cue
button again to take the source out of the Cue bus.
Talkback
There is a talkback button over each fader. If a mix minus is associated with this
source (for example, a codec for remote broadcasting), tapping the
Talk
button will
route the studio talkback microphone (as defined in surface settings) to the mix
minus output. Tap the button again to turn talkback off and resume sending mix
minus to the output.
