Logitek mixIT Audio Console System/JET67 Manual
29
Tip: you can rename these routers to what they are feeding in the DSP Settings
section under Inputs. The label will appear both in the Surface Settings and on
the router widget on the console.
Click Upload to JetStream to save your work. If you leave the webpage without saving, any
changes will be lost.
DSP Settings
Figure 16 - The DSP Settings Page
Port 1 Tab
This is where we can modify the DSP settings. Changes allowed:
Under Inputs, click on a fader to select which buses are turned on by default. Defaults for the
faders is the program bus. If you wanted to make certain faders always turn aux on by default,
click on the fader and put an x in the box of the bus you want turned on by default.
Also, under inputs, click on Router 1/Router 2/Router 3 to change the name displayed under
the router widget. This is useful to name the router for its destination.
