Logitek mixIT Audio Console System/JET67 Manual
27
Surface Settings
Here is where you assign sources to the faders
Figure 15 - The Surface Settings Page
The columns of this grid are the available sources. The lines in gray are mixes from the DSP such
as program, aux, mix minus, and the built in tone generator. The lines in blue are local inputs.
The lines with a beige background are network inputs.
Left click in the columns 1-12 to assign a source to a fader. This will place an x in the box.
Right click in the columns 1-12 to set the default route on a fader. This is the route that the
console will return to when the system is sent to its default settings. This will place a circle x in
the box. Only one default can be set per column. If no default is set, the first source in the
column is automatically made the default.
In the column for Studio In, set what selections to choose from in the Studio/Guest monitor
selector. Common selections here are program, aux 1-3, air monitor, or an input with a
processed feed where the talent can hear the output of the on-air processing chain if they can’t
listen to air because of profanity delay or HD Radio diversity delay.
In the column for Monitor In, set what selections to choose from in the Control Room monitor
selector. Common selections here are program, aux 1-3, air monitor, or an input with a
