Unpacking
1
1
Operating Your Remote Control
2
2
Installing the Base Stand
3
3
Turning the TV On for the First Time
6
6
Connecting to the Mains Socket
5
5
GB
VIDEO
L
R
Y
Pb
Pr
HDMI2
Connecting the Aerial
4
4
Quick Start Guide
L19LDIB11E
Thank you
for purchasing your new Logik TV.
Your new TV incorporates the latest technology to enhance your
viewing experience. We would suggest that you allow about 20 mins
for initial setup.
Please follow this guide for a successful first time installation.
Remove all packaging from the TV. Retain the packaging. If you dispose of it
please do so according to any local regulations.
Install the batteries correctly by following the polarity (+ and -)
indications in the battery compartment.
1. Press and lift the back
cover up to open the
battery compartment of
the remote control.
2. Insert two AAA size
batteries. Close the
battery compartment
cover.
The first time you turn the TV on, it will go straight into First Time Installation.
Well done,
your new TV is now ready to use. You will find that there are many exciting features available. To get to know all these features, please
take some time to read the instruction manual provided with your TV.
To mains socket
(P.N.: 4033C193619)
19” HD Ready Digital LED TV
1. Press the OK button to start First Time
Installation.
2. Press
the buttons to
select your desired language to
be displayed on the menu. The
default on-screen menu
language is set as English. Press
the OK button to confirm.
3. Press the
buttons to select DVB-T /
DVB-C and then press the OK button to
confirm.
LCD TV
Base Stand
Quick Start Guide
Remote Control /
AAA Batteries x 2
Screw A
Instruction Manual
Mains Adapter
SCART Adapter Cable
1. Lay the TV down on a flat surface with the back side facing up. Please
make sure to place a soft cushioned material (such as a pillow or thick
piece of foam) beneath the screen.
2. To install the base stand, align the screw hole and then secure the base
stand with the provided 1 screw.
Screw A x 1
(P.N.:
20912223101)
Connect one end of the RF coaxial cable to the aerial socket on the wall and
the other end of the cable to the RF IN (75Ω) socket at the rear right side of
your TV.
Do not connect the TV to the mains supply until you have
completed all the connections.
1. Connect the mains adapter to the mains adapter socket located at the
rear right bottom side of your TV and then connect to the mains socket
after you have completed all the connections.
2. At this stage, the TV switches to standby mode. The red LED indicator
will illuminate on the front panel of the TV.
3. In standby mode, press the button on the right side panel of the TV
or on the remote control to turn the TV on. The red LED indicator will
turn blue.
HDMI1
USB
PC AUDIO
VGA
RF
SCART
RF Coxial Cable
(not included)
Mains Adapter
(included)
First Time Installation
Please ensure aerial is plugged in!
Then press OK button.
Dansk
Deutsch
Hrvatski
Italiano
OSD Language
OK
Magyar
Nederlands
Norsk
Polski
English
Cesky
E k
Espanol
~
Fran ais
Portugues
Pycck
DVB-C
DVB SELECT TYPE
DVB-T
3a. If you select DVB-T, press the
buttons to select the desired country
and then press the OK button to start
tuning.
3b. If you select DVB-C, the next step is to
configure the DVB-C system (Scan type /
Frequency / Network ID / Symbol(KS/S).
Press the OK button to go to the tune
type add country select menu this step is
the same as DVB-T, select the tune type
(DTV/ATV). Press the
buttons to
select the desired country and then press
the OK button to start tuning.
4. Channel tuning will commence. This operation
may take up to 6 minutes. The display will show
the progress of the tuning and the number of
channels found.
Tune Type DTV+ATV
UK
Australia
Austria
Belgium
Bulgaria
Croatia
Czech
Denmark
Finland
MENU
DVB-C Scan Menu
Scan type
Full
610000
Auto
Auto
Frequency
Network ID
Symbol(KS/S)
OK
MENU
Channel Tuning
TV : 3 Channel(s)
DTV : 0 Channel(s)
Radio : 0 Channel(s)
Data : 0 Channel(s)
36%... 668.75MHz (TV)
Please press MENU to skip.
screw
screw
or
OR
L19LDIB11E_QSG_5L_final111107_Zell.pdf 1 07/11/2011 2:09 PM
