CLONING
Logicube SCSI-
NG User’s Manual
28
4.5 Starting the Cloning Operation
Once all the settings and options have been selected or set, tap the
Start
icon to begin the Cloning
operation. A confirmation screen will appear. Tap the
Yes
icon to continue.
A progress bar will appear at the bottom of the screen showing the bytes processed, the rate (speed),
elapsed time, time remaining, and bad sectors (on the Master drive, if any). When finished, the status
will show “COMPLETED”. At this point, it is recommended to tap
Reset Task
to reset the task, so the
drive bays properly reset and not show as being used or assigned for other tasks.
Содержание SCSI-NG
Страница 12: ......
