QUICK START
Logicube SCSI-
NG User’s Manual
11
3.
Tap the
Master
(or
Image File
)
icon and choose the Master from the list of connected
drives then tap the
OK
icon.
4.
Tap the
Settings
icon and adjust the settings as needed (
Job Info
,
Clone Method
Settings
,
HPA/DCO/ACS3
,
Error Handling
,
Hash/Verification Method
, etc.) then tap the
OK
icon.
The
Verify feature
is an option. To find out if this option is
installed, go to the
Statistics
icon from the navigation menu
on the left and select the
Options
tab. To purchase the Verify
option, contact our sales team at
The Settings screen may be different in each of the modes.
Details on the different Settings screens can be found in
Chapter 5: Types of Operations
Log file names can be set in
Settings
in the
Job Info
screen by
entering a Job Name. See
5.
Tap the
Target
(or
Image File
)
icon and select the Target or Image File then tap the
OK
icon.
For
Drive to Image
, the SCSI-NG must be used to format
drives. If the Target drive is not formatted by the SCSI-NG,
the
Format
icon will appear in the Format column. Tap
the
(Format)
icon to format the Target drive.
6.
Tap the
Start
icon to start the cloning task.
7.
A progress bar will appear at the bottom of the screen showing the bytes processed, the
rate (speed), elapsed time, and time remaining.
8.
When finished, the status will show “COMPLETED”. At this point, it is recommended to
tap
Reset Task
to reset the task, so the drive bays properly reset and not show as being
used or assigned for other tasks.
The number of bytes shown on the progress bar is
not the actual size of the drive. This is the actual
bytes being processed. When ‘Verify’ is set to
“Yes”, the reported number will double in size.
3.2 Hash
A hash or operation can be performed to any connected drive. Performing a hash task
will instruct the unit to calculate the hash for the specified drive or validate the hash
Содержание SCSI-NG
Страница 12: ......