Logicube SCSI-NG, Руководство пользователя

Страница: 18 / 74

QUICK START
Logicube SCSI-
NG User’s Manual
10
6. Locate the line that shows “Wiped”. This will either show True (drive is blank) or False .
3.1 Clone
This type of operation allows the imaging of a Master drive or image to a Target drive
or image. There are three different imaging modes and several settings to choose
from. Drives can be cloned using
Mirror (bit-for-bit copy) or Clever (copies only data
areas, skips blank sectors, and partitions can be resized to fit larger capacity drives).
These selections should be performed in order from left to right.
Details on the different screens
found in the Imaging operation can
be found in
Chapter 4: Cloning .
For details on cloning
drives to a smaller capacity
Target, see
Section 4.0.1 .

Drive to Drive – Performs a bit-for-bit copy of the Master producing an exact duplicate of the
Master drive. This is also known as a mirror clone.

Image to Drive – Restores an image created by the SCSI-NG to one or more Target drives.

Drive to Image – Creates a Logicube SCSI-NG image file to a network repository or Target drive.
This image file can be restored to a drive using the Image to Drive mode.
3.1.1 Step-by-step instructions – Clone
Details on each selectable
option on the Clone screen can
be found in
Chapter 4 : Cloning .
1. Select Clone from the types of operation on the left side.
2. Tap Mode and select one of the available modes, then tap the OK icon.