Logicube SCSI-NG, Руководство пользователя

Страница: 17 / 74

Logicube SCSI-
NG User’s Manual
9
3: Quick Start
3.0 Quick Start Guide
This chapter gives a basic overview and steps on how to perform different types of operations using the
SCSI-NG (Clone, Hash, Wipe, etc.). Complete details on each operation, menu, or selection, and the
different screens can be found in
Chapter 4: Cloning and Chapter 5: Types of Operation .
The passwords for built-in accounts can be changed.
Instructions on how to change the passwords to the two
built-in user accounts can be found in
Section 5.7.2.2 .
There are software options available such as:
-
Verify option – allows verification of data copied during the clone task.
-
Wipe option – allows the ability to wipe drives connected to the Target bay.
To find out if these options are enabled on the unit, tap the Statistics icon from
the navigation menu and select the Options tab.
To purchase any of these options, contact the Logicube Sales Department at
sales@logicube.com .
The SCSI-NG clone, hash, and wipe speeds are determined by
several factors including (but not limited to) the following:

The manufacturer specifications of the drive(s) being used

The age of the drive (manufactured date, not purchased date)

How often that drive has been used
3.1.1 Blank Disk Check
A blank disk check can be performed to see if a drive has been wiped by the unit. This check will
not be accurate if Secure Erase or Pattern Buffers was used to wipe the drive. To perform a
blank disk check:
1. Connect a drive to the unit.
2. Choose Clone, Hash, or Wipe/Format.
3. Go to Master or Target to see the list of connected drives.
4. Tap the More Info icon to the right of the drive to display information about the drive.
5. Tap or click the down arrow located to the right of the screen to scroll down to the
second page of information.