Logicor PSU 1001, Руководство пользователя

Страница: 70 / 83

© 2016 Logicor (CH) Ltd clear-heater.co.uk Page 59
MENU ► Timer (Clock) Icon
Timer Settings
It is recommended to leave your Clear Heater System
switched on at all times to achieve optimal heating
performance and cost savings.
You may prefer to vary the temperature during the day.
To do this, schedule your heater system to heat at
different temperatures at set times of the day for each
day of the week.
If you prefer to switch the system to an ‘almost off’ state
at a particular time, reduce the temperature by 9°C for
example and it will in effect turn your heater system off
until your room environment cools down by 9°C. At that
point the heater system will resume heating to retain the
new lower temperature.
Options:
 Weekly settings (Page 60)
Schedule your heater system on a day by day basis to
increase or reduce the temperature of the whole
heater system at different times of day.
This is useful if for example you prefer a cooler
temperature at night or a warmer temperature at
specific times of day.
 Graphical view (Page 63)
View your weekly schedule settings in an easy to view
graphical form.
 Enable / disable scheduling (Page 64)
Turn weekly scheduling on or off from the main timer
menu screen by pressing the screen option once to
enable or again to disable.
Enabling scheduling operates your heater system
according to your weekly schedule settings.
Disabling scheduling operates your heater system
according to your current (normal) heater settings.
The scheduling status (either enabled or disabled) is
displayed in the INFO message at the top of the
screen.