The following items will be used in this QuickStart Guide.
(Complete kit contents are provided on the included Packing List.)
Baseboard, AM1808 SOM-M1,
4.3” LCD (pre-assembled)
Power Supply & Cord
(use power cord specific
to your region)
USB SD Card
Reader
Demo setup.
(Setup development kit to sample OS demos.)
2
Connect UI board to
baseboard connectors
at center and on the
right
5
Connect WLAN
daughter card to
baseboard connector
on the right
12
GUI will appear on LCD
screen (Linux demo
shown)
Important baseboard locations.
(Numbers correspond to the steps on the right.)
SD Cards
(Linux &
Windows CE
Demos)
11
Switch power on
6
Connect WLAN
connector board to
baseboard connector
at the far left
User Interface (UI) Board
WLAN Daughter Card,
Connector Board,
& Ribbon Cable
NOTE:
Not supported in
Windows CE Demo or SDK
1
Choose to use the
included UI board (
go to
Step 2
) or WLAN daughter
card (
go to Step 5
)
OR
11
2
8
10
6
2
&
5
8
Choose OS demo and
insert SD card (slot on
bottom of baseboard)
3
Secure the boards with
included screws at the
locations indicated
9
Connect power cord
and supply
7
Set DIP switch S7:2 and
S7:3 to the
ON
position;
all other switches remain
in the
OFF
postion
10
Connect power
to baseboard and
electric outlet
4
Verify all DIP switches
are set to
OFF
(
go to
Step 8
)
4
&
7