manualshive.com logo in svg

Logic IO RTCU LX5 eco, Техническое руководство, Страница: 2 / 33

Поделиться
Скачать
Logic IO RTCU LX5 eco Скачать руководство пользователя страница 2

RTCU LX5 eco Technical Manual V1.00 

Advanced Industrial M2M/IoT Gateway 

 

Logic IO ApS. 

 

Ph:   (+45) 7625 0210 

Holmboes Allé 14 

 

Fax: (+45) 7625 0211 

8700 Horsens                               

Page 2 of 33 

Email: [email protected] 

Denmark                                       

 

www.logicio.com 

 

 
 

Introduction

 

The 

RTCU LX5 eco

 is a powerful M2M/IoT Gateway device that rests on an entirely new hardware 

and software architecture representing a significant leap in functionality, power, openness, and 
performance. The 

RTCU LX5 eco

 has been designed for the most demanding M2M and Industrial 

Internet of Things applications that dictate the most advanced product available on the market. 
 
The device is based on the new 

NX32L

 (NX32 for Linux) architecture that embraces many new 

technologies and at the same time maintains full backward compatibility, which ensures already 
implemented and tested 

NX32

 applications can execute without changes. 

 
The 

RTCU LX5 eco

 device has been designed to meet the ever-increasing security challenges. It 

offers full TLS on all major protocols and includes a hardened protected execution environment 
with dual-boot and automatic fallback and recovery. 

This manual contains technical documentation covering the installation and usage of the RTCU 
LX5 eco device. For detailed information on the product's programming and software 
configuration, please refer to the RTCU IDE documentation. 
 

For detailed information on the powerful RTCU M2M Platform, please refer to the  

RTCU M2M Platform datasheet

. 

 
 
 
 

Содержание RTCU LX5 eco


































Отзывы:

Нет отзывов