Loepfe YARNMASTER 3N1, Инструкция по установке

Страница: 29 / 30

29
3N1
SPECIFICATIONS
Specifications
– Unit
– supply voltage : 24Vdc SELV
– supply voltage range : -15% / +25% (including ripple)
– supply current : 1.1Adc
– Fuse : T2AL
– Temperature range : 5 – 50°C non condensing
– Output stop signals
– Auxilary supply stop signals : pin10/J44 and pin10/J45
– Output voltage : 12V +/- 5%
– Maximum output current : 100mA / connector
– High side outputs : J48, J49
– Type of output : open collector
– number of outputs : 2 x 12 outputs
– Max. output current / output : 5mA
– Max. output voltage if output is active : Supply voltage
– Min. output voltage if output is active : Supply voltage - 1.5V
– Low side outputs : J44, J45 or J53, J54
– Type of output : open collector
– number of outputs : 2 x 12 outputs
– Max. output current / output : 30mA
– Max. output voltage if output is active : 1.5V
– Min. output voltage if output is active : 0V
– Max. ouput sustaining voltage : Supply voltage
– Internal pull-up resistor : 10K Ω / output to supply voltage