Loepfe MillMaster TOP, Руководство по установке

Страница: 8 / 53

Safety
8 www.loepfe.com
MillMaster TOP
2 Safety
2.1 Intended use
This software is intended exclusively for use as a data analysis and administration tool for yarn clearers
that are linked to the central units of the spinning machines. Any other use, or any use that goes beyond
the intended purpose, is considered improper. Loepfe Brothers Ltd. shall not be liable for any damages
that result from improper use.
2.2 Safety Information and Warnings
Safety information and warnings draw attention to hazards and are marked with symbols and signal words
to express the danger level.
DANGER
Indicates an immediate hazardous situation which will result in death or serious
injury.
WARNING
Indicates a potentially hazardous situation which could result in death or serious
injury.
CAUTION
Indicates a potentially hazardous situation which may result in minor oder
moderate injury.
NOTE
Indicates a potentially hazardous situation which may result in damage to
property.
2.3 Explanation of symbols
Warning symbol
General warning symbol
Electrical voltage warning