Start a new ergo test, after
selecting a subject, and choose
the 'Lodebike' for ergometer.
When the ergometer is directly
connected to the computer you
can select a COM port number
on which the ergometer is
connected to the computer.
When using Cosmed Quark you
can select 'Metabolic card' for
the port selection.
Press OK to confirm and start a
test. Make sure the ergometer is
set up correctly before pressing OK. The procedure is explained in the next chapters.
3.3 - Ergometer Setup
3.3 - Ergometer Setup
The following protocol needs to be set in the Lode ergometer to communicate with the external
equipment.
Bicycle ergometer: Lode Protocol
The next chapters describe the procedures to setup these protocols depending on the type of
ergometer.
5/22
INTERFACE SHEET - COSMED OMNIA - CORIVAL CPET / VERSION: 1.0 - 2016-11-29
