8 - Using the BWSS
This chapter describes how to use the BWSS. Execute the following steps for performing an
bodyweight support test with the BWSS after the BWSS is installed.
8.1 - Adjust the Harness
To adjust the harness read the separate harness manual, within the harness
Note: The patients do need to wear appropriate cloths for the training before putting on the harness.
Loose fitting clothing will tend to allow the harness to ride up.
8.2 - Select the desired bodyweight support range
To accomplish the best dynamic
support forces, the Bodyweight
support system is fitted with 7
dynamic support ranges. Within
each dynamic support range,
the supported weight can be
accurately set with the up down
buttons.
Execute the following steps to
select the desired bodyweight
support range:
1. Switch the BWSS on.
2. Fix the fall stop rope
3. Lower the balancer,
4. until the unlock light goes on.
5. Select the desired bodyweight support range. We advise to select a range that is the closest above
the desired weight to be supported. Example: The desired weight to be supported is 28 kg. The best
support range for this example is 30kg.
11/21
M932822 / VERSION: 1.0 - 2020-07-23
Содержание BWSS
Страница 3: ...20 21 13 Science 14 Specifications ...