Loctite EQ RC24 RD, Руководство по эксплуатации

Страница: 52 / 60

OPERATING ELEMENTS
52
To reset error messages, proceed as described below:
▪
When the interface is set to external (e)
To acknowledge the message, apply a short voltage signal (24 V) to the reset input of
interface XS10.
▪
When set to internal (i)
Tap the status bar to acknowledge the message. If the error message is active, the
following screen appears:
Tap on
Reset Timer to reset an error.
Locking and Unlocking the Main Screen
If the following screen appears, the touch panel is locked, e. g. to prevent unintentional
entries.
Locking the screen
1. Open the menu .
2. Click on the lock icon .

You will be returned to the main screen and the lock will appear on the screen. The screen
is locked.
Unlocking the screen
Press the touch panel anywhere for three seconds to unlock the screen.