A
x8
C
5x5
5x5
C
x8
B
A
x8
C
x1
B
x8
M6
5x5
M8
3
4
D
x2
1
2
Item No.: ET118W-N
Installation guide
Accessory list
Attention: The drawings below are for guidance only and they may differ
slightly from the product and fittings received. Please contact our customer
service department should you have any queries.
Cable clamp
50KG
720
-
1210mm
230mm
Technical data
Max. Weight Capacity
Height Range
Drawer Stroke
Charging Ports/ Child Lock
Component list
1. Tabletop X1
2. Lifting columns X1
3. Feet X2
4. Power plug X1
STEP 1
Install the tabletop and
the lifting columns
STEP 2
Install the feet
STEP 3
Install the motor and power lines
Connect the motor plug to the control box, then connect one side of the adapter plug to
the adapter, another side to the power line.
Note: the motor and power lines can be fixed by cable clamp according to actual use.
2
1
B
C
3
A
C
Use a hexagon allen key(C) and M6 screws(Ax8) to install the feet
to the lifting columns. Pay attention to the orientation.
Use a hexagon allen key(C) and M8 screws to assemble the
tabletop(1) and lifting columns(2).
Note: Do not touch the surface directly to the ground during
installation to avoid scratching the tabletop by sharp objects.
4
