M4 x12mm
(8PCS)
(8PCS)
M5 x12mm
A.
B.
C.
E.
(3PCS)
M6 x12mm
Φ
6.5 x
Φ
13 x 2.0
(16PCS)
F.
4 x 4 Allen key
(1PC)
D.
(2PCS)
M6 x14mm
G.
5 x 5 Allen key
(1PC)
75 x 75 / 100 x 100 mm
7
5 x 7
5 / 1
0
0 x 1
0
0
25-120mm
Item
No. D7D
Installation Guide
Package
Included
Installation
Steps
(A) Parts Included
(B) Attachment Screw Set
STEP 2 - Option A: Install bracket to the desk
(C)Tools Needed for Assembly
1. Verify that the monitor has holes at VESA spacings, either 100 x 100mm or 75 x 75mm.
If it does not have this pattern, the monitor cannot be installed.
2. Remove the monitor’s original fixed base. Be careful not to scratch the screen.
STEP 1: Preparations before installing monitor
This option is for desks without a gromment hole.
1. Attach the bottom support 2 (5) to the tube by tightening screws (C) with 4 x 4mm hex key (F).
2. Turn the mount upside-down and put anti-slip rubber 1 (8) and anti-slip rubber 2 (9) onto the
bottom support 2 (5).
3. Put anti-slip rubber 3 (10) onto the top of knob (6).
4. Attach the knob (6) to the bottom support 2 (5) using screws (D) with 4 x 4mm hex key (F).
5. Position the bottom clamp against desk surface and fully tighten clamp knob (6).
Tighten
Desk
For table thickness: 0.98 – 4.72
"
"
(25 – 120mm) select appropriate
hole in the bottom support according
to the desk thickness.
100 x 100
4.4-19.8Ibs
2-9kg
10" - 27"
75 x 75
-90
°
-15
°
F
F
①
. Bottom support 1 x 1
②
. Screw x 1
③
. Washer x1
④
. Butterfly
knob 1 x 1
⑤
. Bottom support 2 x 1
⑥
. Knob x 1
⑦
. Cable cover x 1
⑧
. Anti-slip rubber 1 x 1
⑨
. Anti-slip rubber 2 x 1
⑩
. Anti-slip rubber 3 x 4
⑪
. Washer x 1
