Inside
3
5
User Manual
Smart & Premium Design
Electric Shock & Static Proof
Fire-proof
Passcode Hide
■ Please read the manual throughly in order to secure your safety and to use the product
properly.
■ Please use the RF Tag which is provided with door lock.
■ If you use the RF Tag which is not provided with door lock, it may be occur security problem.
■ This section contains user safety information.
Please read carefully and use it properly.
Outside
Contents in user manual can be changed without notifying users in order to
improve product quality or service.
Ver.1.0
Features
OPEN/CLOSE function
Door open by entering passcode
Door open by inside handle (Anti panic release function)
Outside force-lock function
Outside force-lock by passcode
Auto close/Manual close setting function
Setting auto close/manual close by switch
Inside force-lock function
Inside force-lock by program
Others
Etiquette mode, High temperature alert, Intrusion alert, Passcode hide, Prank prevention,
Reset, Master management, Low battery alert, Auto re-lock, Door open alert
Index
4
Safety Information
Parts
Basic Functions
If not followed, user can be dead or seriously injured.
※Types and quantity of RF Tag and emergency key can be changed according to a
specification.
If not followed, user can be injured or property damage can be caused.
warning
Caution
Do not remove
▷ You should not remove any installed parts from the door.
If you need to do so for any reason, please contact
service center and consult.
Do not spray water to the door lock or install
it where it is exposed to water or damp.
▷ door lock is not water proof, thus water exposure can
cause malfunctioning.
▷ It can cause product malfunction or operation malfunction.
Do not install where it is exposed to snow or
rain. Due to the extreme temperature difference
of indoor and outdoor, it can cause dampening
the door lock. Please use it after it dries.
▷ It can cause product malfunction or operation malfunction.
▷ It can cause product malfunction or operation malfunction.
Make sure the door lock is properly installed
and read manual for proper functioning.
Components name
1. Open battery cover and press register Button [S].
6
Basic Functions
How to register passcode
■ When register mode is canceled, previous passcode is kept.
■ When more than 14 digits are entered, it will not be registered.
■ When less than 4 digits are entered, it will not be registered.
■ When a new set of passcode is registered, existing passcode is deleted.
■ While entering passcode, registration is canceled when there is no action for
60 seconds.
1. Open battery cover and press register Button [S].
How to register RF Tag
2. Place RF Tag on RF Tag reader.
You may register up to 50 RF Tags.
Repeat the process consecutively if you have more RF Tags to register.
3. Press register Button [S] to complete the procedure.
1. Open battery cover and press set Button [S].
How to delete RF Tag
■ If lost RF Tag, register new RF Tag after deleting all existing RF Tag information in system.
■ When canceled, existing RF Tag is kept.
■ Delete mode is canceled when there is no action for 60 seconds.
2. Press 0 Button on the keypad.
3. Press set Button [S] to complete.
2. Input desired passcode.
Passcode can be set 4~13 digits.
3. Press Button to complete the procedure.
You will hear buzzer melody from door lock.
How to open door from inside
■ Auto lock is activated when the door is not opened within 7 seconds.
■ When outside force-lock is set, opening the door will set off intrusion buzzer alarm.
■ When childproof function is set, childproof function is deactivated.
- Press down the inside handle to open while locked.
MEMO
Motis
Screw Set
RF Tag
Battery
(4EA)
Wireless Communication
Module (Optional Device)
Installation manual,
User manual(1)
Emergency key
(3Way Model Only)
04
04
05
06
06
06
07
07
07
07
08
08
08
08
08
09
09
09
09
09
Introduction
Safety Information
Parts
Basic Functions
How to register passcode
How to register RF Tag
How to delete RF Tag
How to open door from insde
How to open door from outside
Additional Functions
Outside force-lock function by passcode
Etiquette mode function
Inside force-lock/release function
Passcode hide function
High temperature alert function
Intrusion alert function
Prank Prevention function
Deadbolt jamming alert function
Auto/Manual lock setting
Volume control function
Low battery alert function
Door open alert function
How to change batteries
10
10
Opening door with emergency battery
11
Incapacitation function of usual user’
s passcode and RF Tag
05
Components name
■ When registration mode is canceled, existing RF Tag is kept.
■ When 50 consecutive tags are registered, registration is completed automatically.
■ When error occurs during the process, start over by pressing register button.
■ Registration is canceled when there is no action for 60 seconds.
■ You can not register the same RF Tag twice.
■ When a new RF Tag registered, existing RF Tag is deleted.
Door open by RF Tag / Door open by emergency key
Register & delete function of master passcode/RF Tag
warning
warning
Caution
Caution
Checklist before calling for service
Specifications
12
12
11
Wireless communication module Registration (Optional Product)
[Touch / RF Tag / Key
(3Way Model only)
]
Remote Control
(Optional Device)
11
Remote controller Registration (Optional Product)
Keypad
Start/End Button
Emergency
power port(9V)
RF Tag Reader
RF Tag Reader
Key hole
Out handle
Battery box
AA Alkaline batteries
1.5V 4EA
In handle
Register Button [S]
Status LED
Double lock switch
[Touch / RF Tag]
[Touch / RF Tag / Key]
C150B2
C150B3
C150 Series
[C150B2]
[C150B3]
※ Please make sure whether the new passcode works or not
before you close the door.
※ This is to open the door in an emergency.
