11
12. SETUP PROCEDURE
Once you finished installation you should proceed to setup procedure as specified in this chapter. You can control Yacht Router via
computer with Windows OS, iPhone, iPad or Android smart phone or tablet. You can simultaneously use multiple and different
platforms (e.g. iPhone, Android and PC) to control Yacht Router. If your system is equipped with Touch Screen Controller 4G check
Chapter 12.4.
12.1.
Installing Yacht Router 4G Control Software on computer with Windows operating system
Every Yacht Router is supplied with USB memory stick. On a stick you can find Yacht Router 4G Control Software installation
software. Double click on
YachtRouterSetup
and computer will start with installation. During installation, computer will ask
you following question: “Do you want to allow the following program from an unknown publisher to make changes to your
computer?”. Click on “Yes” and proceed with installation.
YR Control Software is developed for Microsoft Windows 7 and Windows 8 operating system but if will probably work on Vista and
XP. Locomarine does not offer support for any Yacht Router system that is not installed on Windows 7 or Windows 8 operating
system.
We strongly suggest you to download latest version of
Yacht Router 4G Control Software
from Yacht Router website and subscribe
to
Software Update Notification Newsletter
on our website
.
IMPORTANT: Yacht Router 4G Control Software will not work correctly if Standardsoft Internet Explorer 10 and Standardsoft
.NET Framework 4 is not installed on your computer. You can download Internet Explorer 10 from a following link:
windows.Standardsoft.com/en-us/internet-explorer/ie-10-worldwide-languages
. You can download Standardsoft .NET
Framework 4 from a following link:
http://www.Standardsoft.com/en-us/download/details.aspx?id=17851
. We strongly suggest
you to perform latest update of your Windows operating system.
12.2.
Installing Yacht Router 4G Control Software on your iPhone or iPad
To install Yacht Router 4G Control Software go to Apple AppStore. Use it the same way as it is described in this manual.
12.3.
Installing Yacht Router 4G Control Software on your Android smart phone or tablet
To install Yacht Router 4G Control Software go to Google PlayStore. Use it the same way as it is described in this manual.
12.4.
Connecting Touch Screen Controller 4G
Touch Screen Controller 4G is small size panel mount computer with embedded Yacht Router 4G Control Software. It is equipped
with touch screen and is more robust than standard computers and tablets. To connect it to Yacht Router plug supplied (or similar)
Ethernet cable to LAN or BACKBONE port on Yacht Router. Connect power supply to Touch Screen Controller 4G and turn it ON.
Touch Screen Controller 4G will automatically connect to Yacht Router.
12.5. Power on Yacht Router
Once you installed Yacht Router 4G Control Software or connected Touch Screen Controller 4G you can power on Yacht Router.
After you turn in on, power LED indicator will light up and you will hear few beeps from Yacht Router. After about half a minute
of boot period Yacht Router is ready for use. You will know it is ready once you can find
Vessel Network 1,
Vessel Network 2
and
Vessel Network 3
wireless network after network scan on your computer, iPhone, iPad or Android device. Connect your device to
Vessel Network 1, Vessel Network
2
or
Vessel Network 3
wireless network.
Initial password for
Vessel Network 1
,
Vessel Network 2
or
Vessel Network 3
wireless network is: 12345678
IMPORTANT: Be sure your computer is connected only to Vessel Network 1, 2 or 3 network. Disconnect all other connections
(e.g. LAN). Check that the computer is set to obtain IP address automatically (DHCP enabled). On the following link you can find
instructions how to do that:
http://windows.Standardsoft.com/en-US/windows7/Change-TCP-IP-settings
.
